1 2
Stat-X® Systems: Manual ONLY Units
Features Applications Operation/Description Specifications
Made in USA
  • EPA Snap Listed for unoccupied and normally occupied spaces
  • Significantly more effective than alternative extinguishing agents
  • Zero ozone depletion, zero atmospheric life, and insignificant global warming potential
  • Ease of installation — no pressure vessels, piping, or expensive installation manpower
  • Low maintenance
  • Provides reliable, cost effective protection for a wide range of fire hazards
  • No power required — activates thermally or manually
  • Approved by CSIRO, ECB, MCA, ABS and many more
  • Safe for valuable equipment
  • Post fire cleanup — aerosol suspends in air for clean-up and venting after discharge
  • Compact — up to a 90% reduction in space and weight requirements
  • Available in the following sizes (see specifications for more details):
    — 30T (30 g aerosol mass)
    — 60T and 60T long (60 g aerosol mass)
    — 100T (100 g aerosol mass)
    — 250T and 250MT (250 g aerosol mass)
    — 500T (500 g aerosol mass)
  • — 1000MT (1000 g aerosol mass)

Due to their fast response time, low fire extinguishing concentration, and environmental safety, Stat-X fire suppression systems may be used in critical applications across a wide range of industries. Aerosol generators are suitable for use i

  • Small boats

In the event of a fire, Stat-X manual generators can be activated manually via a cable pull.

Upon activation, the generators produce an exceptionally effective, ultra-fine, potassium based aerosol. Unlike gaseous systems, Stat-X aerosol generators are cost effective to install and maintain — as they do not require the pressure vessels, piping or expensive installation costs associated with other extinguishing systems.

Space and weight requirements are minimal and, in many applications, the small size of the Stat-X aerosol generators makes them the only viable option. On an agent weight basis, Stat-X aerosol is ten times more effective than gaseous agent alternatives.

Fire suppression is rapidly achieved through interference between the ultra-fine aerosol particulate and the flame’s free radicals — terminating propagation of the fire.

Stat-X aerosol generators are virtually maintenance free and have a shelf life of over ten (10) years. This, coupled to their low installation cost, makes them an extremely cost effective fire protection solution.

Agent Container. The generator housing is constructed of exterior and interior stainless steel shells separated by an insulating material. The top and bottom of housing is stainless steel. The housing is sealed with a non-permeable membrane and incorporates a mechanical means to ensure rupture of the membrane upon activation. The housing is non-pressurized prior to system activation.

Finish. Brushed stainless steel.

Aerosol Agent. Aerosol generated is potassium based and manufacturer shall provide fifteen (15) minute time weighted average data from an independent United States laboratory demonstrating that the aerosol does not produce (at normal design concentrations harmful levels of CO, CO2, and NOx based on NIOSH standards. There is no ozone depletion potential and no global warming potential. Agent is approved for commercial sale by the US EPA.

Operation/Storage Parameters:

  • Temperature -40° C to +54° C (-40° F to +130° F)
  • Relative Humidity up to 98% at +35° C (+95° F)

Transportation Classification:

  • For shipment by motor vehicle, rail, or cargo vessel:  Special Permit 20600, UN3268, Class 9, Proper Shipping Name: Safety Devices
  • For shipment by air (cargo or passenger): UN0432, Class 1.4S, Proper Shipping Name: Article, Pyrotechnic for Technical Purposes
  • Shipping Limitations:
    — Ground: None
    — Max. weight per unit packaging — Cargo Air 100 kgs (220 lbs)
    — Max. weight per unit packaging — Passenger Air 25 kgs (55 lbs)

General Specifications:

Model 30T 60T (long) 100T 250T 250MT 500T 1000MT
Aerosol Mass:
grams
30 60 100 250 250 500 1000
Weight: kg
(lbs)
.3
(.66)
.49
(1.1)
.827
(1.82)
2.48
(5.47)
1.28
(2.83)
3.43
(7.56)
5.54
(12.20)
Length (with actuator):
mm
(inches)
109
(4.30)
155
(6.10)
152
(6.00)
168
(6.60)
202
(7.95)
218
(8.60)
333
(13.10)
Diameter:
mm
(inches)
51
(2.00)
51
(2.00)
76
(3.00)
127
(5.00)
76
(3.00)
127
(5.00)
127
(5.00)
Discharge Time:(sec) 8.0 8.5 11.5 12.0 18.0 21.0 25.0
Manual Pull Options
Horizontal
Vertical
Material
316 Stainless
316 Stainless
Have a question?
Tel: 1-952-935-9745
Email: info@statx.com
Contact Us
Become a Distributor
Apply to become an authorized Stat-X distributor.
Apply